mercstuff.com

Bravo Bell Housing Hose Tool

This tool is MerCruiser p/n 91- 43579. It is used to remove or install the (2) plastic tapered inserts inside of the water inlet hose located in-between the gimbal housing and bell housing on all Bravo & Blackhawk sterndrives.

: Order # 9844

This is MerCruiser p/n 41674 plastic water hose insert. The tool above is used to thread these inserts into both ends of the Bravo cooling hose which fits into the gimbal housing and bell housing. It expands the hose from the inside to hold it in place.

This insert will fit all Bravo & Blackhawk sterndrives. Order 2 to do both ends.

: Order # 1674

This is MerCruiser p/n 27-44108 1 water inlet hose gasket. This gasket goes inside of the boat and fits the water inlet housing which covers the Bravo cooling hose.

This gasket will fit all Bravo & Blackhawk sterndrives.

: Order # 4108

Click here for Bravo water supply hose

Contact Us Home Page

Precision Services, Inc.
Shelby Township, Michigan 48316

Monday - Friday 9:00AM - 5:00PM EST

Last modified: May 09, 2008