|
|
|
Carrier & Prop Puller
This tool is used to remove the bearing carrier located in the lower housing on most MerCruiser sterndrives. The jaws are used as shown for carriers. Note "A" The jaws can be reversed to remove propellers but on some propellers, 1/8 inch has to be ground off the 2 small ears to clear the inside propeller hub. Maximum capacity for this tool is 5 Tons.
Shipping Wt. 5 1/2 Lbs.
: Order # 0095
|
|
MerCstuff,
llc Monday - Friday
9:00AM - 5:00PM EST Copyright © 2001-2005 Precision Services, Inc. · All Rights Reserved
|